Care Guide
Pillar Candles
First Burn: Let your candle burn for at least 2-3 hours on the first burn to allow the wax to melt evenly across the surface. This prevents tunneling and ensures an even burn throughout its life.
Trim the Wick: Before each burn, trim the wick to about ¼ inch (6 mm) to avoid excessive smoke and uneven burning.
Burn on a Heat-Resistant Surface: Always place your pillar candle on a stable, heat-resistant surface to avoid damage from any melting wax.
Avoid Drafts: Keep the candle away from drafts, vents, or fans, as this can cause uneven burning and sooting.
Extinguish Safely: Use a candle snuffer to extinguish the flame instead of blowing it out to prevent splattering wax and smoking.
Jar Candles
First Burn: Allow the candle to burn long enough for the wax to melt evenly across the entire surface (approximately 3-4 hours), especially on the first burn, to prevent tunneling.
Trim the Wick: Keep the wick trimmed to ¼ inch (6 mm) before each burn to avoid soot and ensure a clean, even burn.
Burn Time: For best results, burn your jar candle for 3-4 hours at a time. Avoid burning for longer than 4 hours to prevent the jar from getting too hot.
Storage: Store your jar candle in a cool, dry place, away from direct sunlight to prevent discoloration and fragrance loss.
Discontinue Use: Stop burning the candle when about ½ inch (12 mm) of wax remains at the bottom to avoid overheating the jar.
Soy Wax Melts
Using Wax Melts: Place one or two wax melts in the dish of your wax warmer. The heat will slowly melt the wax, releasing its fragrance.
Replacing Wax Melts: Once the scent has faded, turn off the warmer and allow the wax to cool and harden. Remove the used wax and replace it with fresh wax melts.
Avoid Overfilling: Don’t overfill your wax warmer, as this can cause spills or messes once the wax melts.
Cleaning Your Warmer: Regularly clean your wax warmer by removing any leftover wax and wiping the dish with a soft cloth.
Eco Resin Products
(Including trays, candle holders, and coasters)
Cleaning: Clean your eco resin products with a soft cloth and mild soap. Avoid abrasive cleaners or scouring pads that can scratch the surface.
Avoid Prolonged Heat Exposure: Although eco resin is heat-resistant, avoid placing products in direct sunlight or near high heat for extended periods, as it may cause slight warping or discoloration.
Handling: Handle your eco resin items gently to avoid accidental chips or cracks, especially with intricate designs.
Water Resistance: Eco resin is water-resistant, but avoid soaking or submerging the items for extended periods to prevent any potential damage.
Use with Candles: If using eco resin trays or holders with candles, always use a heat-resistant mat or barrier to protect the resin from direct heat.